Used Rails R50-R65 Specification and Distributor
Chemical composition is R50 & R65 rail standard, original weight 50 pounds per yard or more, length 6 meters and above. Materials suitable for rerolling into strips and shapes. No bent and twisted rails, frogs, switches and guardrails, rails with split heads and broken flanges. Continuously welded rails may be included provided that no welds are more than 9 inches from the end of the rail. Free of fluff, rust and other impurities with excessive non-ferrous metal inclusions. No war and explosives, shells, cartridges, other weapons and ammunition used or otherwise used and any closed containers. Does not contain any radioactive substances, any harmful chemicals, substances and paints, any organic waste, any other harmful substances. Dirt, dust, rust, lint and other impurities must not exceed 5%.

ISRI code:

(27) Rail, No. 1 Standard Section T-rail, original weight 50 lb/yd or heavier, 10 feet long and over. Suitable for re-rolling into strips and shapes. Get rid of bent and twisted rails, cleats, switches and guardrails or rail flanges with split ends and broken. Continuously welded rails may be included, provided that the welds do not exceed 9 inches from the end of the rail.
(28a) Rails, No. 2 Cropped Rail Ends, standard section, original weight 50 pounds per yard and over, 18 inches long and under.
(28b) Rails, No. 2 Cropped Rail Ends, standard section, original weight 50 pounds per yard and over, 2 feet long and under.
(28c) Rails, No. 2 Cropped Rail Ends, Standard Section, 50 pounds original weight per yard and above, 3 feet long and below.
(29) Rails, 3 gauge steel standard section T, girders and/or guardrails, without cleats and switch rails uncut and free of manganese, castings, welds or attachments of any type except angle steel. Free of any type of concrete, dirt and foreign matter.

Nominal chemical composition

Carbon (C) 0.20% to 0.60%

Manganese (Mn) 0.60% to 0.90%

Silicon (Si) 0.15% to 0.35%

Sulfur (S) 0.05% to max

Phosphorus (P) 0.05% to max

Arsenic (Ar) 0.15% to max

R50 Nominal Specifications – 51.67 kg/m GOST 7173-75

Carbon (C) 0.40% to 0.58%

Manganese (Mn) 0.75% to 0.88%

Silicon (Si) 0.13% to 0.28%

Sulfur (S) 0.045% to max

Phosphorus (P) 0.035% to max

Arsenic (Ar) 0.13% to max

Nominal specification for R65 – 64.72 kg/m GOST 8165-75

Carbon (C) 0.40% to 0.58%

Manganese (Mn) 0.75% to 0.88%

Silicon (Si) 0.13% to 0.28%

Sulfur (S) 0.045% to max

Phosphorus (P) 0.035% to max

Arsenic (Ar) 0.13% to max

Used Rail Scrap R50-R65: R50 (51.67KG/m, GOST 7173-55),

Used rail: R65 (64.72KG/m, GOST 8161-75)

Dimensions and Weight:

1. Length: 12m ~ 12.5m maximum or less according to buyer’s instructions;

2. Width: 5.5 inches; Weight: 64.72Kg. No fishplates or steel or bolts to used rails. All rails are clean and straight. No pitting. Only the atmosphere rusts. Not severely rusted. Rails must be cut to 1.2 m (max) lengths prior to shipment.

3. Packaging used railway scrap iron R50-R65: container or bulk transport.

4. Inspection: Quality and quantity/weight will be inspected by SGS or any reputable inspection agency at the port of loading. The certificate issued by the inspection agency will form part of the document together with the bill of lading, invoice, etc. The cargo inspection by SGS or a well-known inspection agency will be carried out at the destination port and a report will be issued to the effect.

Used Rails R50-R65 Distributor in TANZANIA

SUGAGA is located in Tanzania and specializes in the trading of scrap metal. All grades of ferrous and non-ferrous scrap metal. Our company leaders attach great importance to product quality and company reputation. Therefore, our company has been highly praised by our customers, and has been rated as a model enterprise with good quality and good reputation. Doing business with integrity and always ensuring the best quality is the company’s eternal purpose.